49彩票

At present, most of the filming machines used in the filming machine factories are filming machines. At present, the filming machines sold on the market are generally integrated with the functions of slitting and rewinding. The winding film with large diameter can be rewound into several rolls with the same width and small diameter. It can also be divided into small roll products with different width. Slitting/rewinding can correct the mislayering of the product or cut off some defects of printing and compounding, and improve the appearance flatness of the coil.

From the point of view of slitting equipment, advanced slitting machine must have high-precision tension, pressure setting, tension, pressure change, speed regulation, tension, pressure regulation and mother coil swing in the process of operation and other functions. The cutting parameters should be set and adjusted regularly according to the cutting width, thickness, material and diameter of the winding film. Otherwise, although high quality stretching film can be produced, the final result of slicing is inferior products. Following is the operation method of the winding film slitting machine with small arrangement.

49彩票First of all, before using the winding machine, we should eliminate all the hidden safety problems in the operation site. At the same time, we should pay attention to check whether all the data of the film Slitter are normal, whether the voltage is normal, whether the current is normal and stable. Secondly, open the power switch of the hydraulic system of the winding film machine and check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable. Thirdly, open the pneumatic shutoff valve of the slitter to check whether the air pressure is correct and stable. After that is the setting control of the pipe cutter. According to the film type, thickness, length and width arranged in the slitting plan sheet, the slitting menu is set. Relevant filming files are filed from PDF. Set the winding length and width of the film with corresponding specifications. Select the appropriate winding position, adjust the roll arm and roll, and install the corresponding specifications of the paper core. Then, it is the feeding of the paper pipe machine of the slitter, and the film is pierced. Finally, it is the start-up operation and use control of the winding film slitter.